FT-100a Expansion Modules and Accessories

The FT-100a comes equipped with enough features and input/output capabilities to handle many test and control tasks, but when even more capabilities are needed, expansion is as simple as connecting one or more of the optional accessories. FT-100a expansion accessories may be connected at any time, with no modifications required.

EXPANSION  MODULES - Add all the extra I/O you will ever need!

Expansion Modules allow the FT-100a to be "customized" for extra input/output capabilities.  Installation of Expansion Modules is as simple as connecting the supplied interface cable from the back of the module to the back of the FT-100a.  Up to seven expansion modules may be connected, permitting a vast and flexible amount of I/O capabilities.  Interface hardware and firmware is already in place in the FT-100a.  Programming interface is automatic and transparent to the operator or programmer.

Expansion Modules are enclosed within their own housing and may be "stacked" under the FT-100a or separated for more convenient cable connections.  In most cases, two expansion modules may be enclosed within one housing, saving space and costs.  Y-tek can even offer custom-designed expansion modules.

Expansion Module Specifications
(Note:   Digital & Control I/O specifications are the same as FT-100a)

Notes:  1.  Absolute maximum ratings.  Not recommended operating.
            2.  If different analog input/output specifications must be met, contact the factory.
            3.  Cumulative errors, including:  accuracy, non-linearity, offset, and gain throughout the entire temperature range.

1041 SERIAL PORT EXPANDER - Add Three more serial ports to the FT-100a!

The 1041 is an optional accessory for the FT-100a that expands the number of serial communications ports from one to four!  Simply connect the 1041 to the FT-100a's serial communications connector on the rear panel, and suddenly, you have three more serial ports!  All control is transparent to the operator and programmer.  Contained in its own housing with no external controls, the 1041 may be tucked away for maximum space utilization!

CONFIGURATION OF AVAILABLE EXPANSION MODULES

Notes:  1. Single-piece price.  Contact Y-tek for quantity pricing.  Prices subject to change.
            2. Only one 1548 module per housing.  "Dual-module credit" does not apply to module 1548.
            3. When two expansion modules are installed in one enclosure, subtract "Dual-module credit" from the sum of the
                price of the individual modules.

In addition to these accessories, Y-tek always has new accessories under development.  If you have a need that isn't covered by one of these accessories, give Y-tek a call.  We can even develop "custom" accessories, often at no extra cost to the customer.

Notice: The information presented here is believed to be accurate, however, Y-tek assumes no
                 responsibility for errors and reserves the right to make changes at any time without notice.

Y-tek, Inc.    851 Seton Court, Suite 1B, Wheeling, IL 60090        Phone: (847) 436-9835

Y-tek, FT-100 and FT-100a are trademarks of Y-tek, Inc. and may not be reproduced in any way without express
permission from Y-tek, Inc.  Any questions regarding this web site should be directed to info@Y-tek.com